Ultrasonic Flaw Detector

The use of the ultrasonic flaw detector:

• to test the quality of welds and base metal of products;
• to detect corrosion, cracks, delaminations and other internal defects;
• to determine coordinates and parameter estimation of defects such as discontinuity, cracks and uniformity of material in products from metal, plastic, composites and other materials;
• to measure the thickness of products.

Other Details:

• UTS-270 Digital Ultrasonic Flaw Detector Overview


• UTS-270 is a portable industrial non-destructive flaw detector, which can rapidly, easily and accurately inspect, locate, evaluate and diagnose various defects (crack, inclusion and pinhole, etc.) in a work piece without destruction


• It can be used both in a lab and field


• The instrument can be widely used in any fields that need defect inspection and quality controlling e.g. manufacturing industry, iron & steel metallurgical industry, metalworking, chemical industry, etc., also be broadly used in the active safety inspection and service-life evaluation in such fields as aerospace, railway transportation and boiler pressure vessels, etc.


• It is an essential instrument for non-destructive inspection industry


• When the ultrasonic wave propagates in a job, one can detect the defect in it by the influence on the propagation of ultrasonic wave based on the acoustic characteristic demonstrated by the defect in the material


• Based on this principle, by using ultrasonic wave one can measure such defects as crack, pinhole and inclusion in such media as metal, non metal and composite, etc.


• Basic working principle for ultrasonic detection

Advantages:

• Automated calibration (IIW), Automated gain


• DAC, AVG, TCG, B scan, AWS, No Limited Video record,


• High-speed capture and very low noise


• high contrast viewing of the waveform from bright


• Powerful pc software and reports can be export to excel

Performance Features:

• Automated calibration of transducer Zero Offset and/or Velocity


• Automated gain, Peak Hold and Peak Memory


• Automated display precise flaw location(Depth d, level p, distance s, amplitude, sz dB)


• Automated switch three staff gauge ((Depth d, level p, distance s)


• 300 independence setup, any criterion can be input freely, we can work in the scene without test block


• Big memory of 800 A graph


• Gate and DAC alarm, Acoustic-Optical alarm


• USB port, communication with pc is easy


• The embedded software can be online update


• Li battery, continue working time up to 12 hours


• Display freeze


• Automated echo degree


• Angles and K-value


• Lock and unlock function of system parameters


• AWS D1.1


• Dormancy and screen savers


• Electronic clock calendar


• There are 14 standards of DAC in UTS-270.


• Automated make video of test process and play Connect the USB Disk, the length of video is unlimited


• Two gates setting and alarm indication


• High-speed capture and very low noise


• DAC, AVG, TCG, B Scan, Solid plastic housing (IP65)


• Automated calculate the size of the flaw with w ide bottom type in AVG function


• 6dB DAC functions


• Provides high contrast viewing of the waveform from bright, direct sunlight to complete darkness and easy to read from all angles


• Powerful pc software and reports can be export to excel


• 2.6 Technical Parameters